Dritz MY DOUBLE DELUXE

To Next Page

You finally purchased a dressform. Congratulations! Now what? You chose one from a selection

of forms that have different measurements and features. See our tutorial How to Choose a

Dressform for more information on the differences in dressforms. Now you must adjust the dress-

form size to match your own measurements and start to use it. In this tutorial we will explain how

the adjustment dials work and how to get the most out of your dressform.

Product Tutorial

How to Use a Dressform

Be Crafty.

Set up your form according to the instructions. Make sure the

assembled stand is securely placed on the floor with legs or

casters firmly in position.

SET UP YOUR DRESSFORM

Insert leg.

Lock legs or wheels

into place.

To mount the dressform onto the stand, slide the inner

body pole onto the pole attached to the stand. It will rest

against the height adjuster (A). This is the wing nut

assembly located on the pole attached to the stand.

To adjust the dressform height, loosen the height adjust-

er wing nut by turning it to the left. Raise the height

adjuster and the dressform until shoulder height matches

your own shoulder height. (See the measurement chart

located in our tutorial, How to Choose a Dressform.)

Tighten the wing nut to keep the dressform at the proper

height.

PLACE FORM ON STAND POLE

AND ADJUST THE HEIGHT

TIP

Have a friend help you with

shoulder height adjustment.

The Swivel Control (B) is the wing nut assembly located

on the bottom of the inner body pole. It can remain loose so the form swivels as needed. Tighten to

keep the form stationary.

BACK WAIST

LENGTH

ADJUSTER

SWIVEL CONTROL

HEIGHT ADJUSTER

Tighten or loosen

to control spin.

Adjust to shoulder

height or raise and

lower to adjust form

to a dierent

working height.

Main Page

Need help?

Do you have a question about the Dritz MY DOUBLE DELUXE and is the answer not in the manual?

Summary

How to Use a Dressform

Set Up Your Dressform

Set up your form according to the instructions, ensuring the stand is secure.

Place Form on Stand Pole and Adjust Height

Mount the dressform onto the stand pole and adjust its height to match your shoulder height.

Adjust the Back Waist Length

Adjust the Size

Adjust Incrementally

Always adjust size incrementally around the form to avoid stressing internal parts.

Adjusting the Neck Size

Twin-Fit, My Double Deluxe, and Celine Neck Adjustment

Adjust the neck size by pushing down and turning the dial or finial on specific models.

Petite My Double and Little Miss My Double Neck Adjustment

Loosen the finial, pull neck sections apart, measure, and secure for these models.

Small, Medium, and Full-Figure My Double Neck Adjustment

Turn the cap covering the neck to align with the indicator notch for desired measurement.

Lady Valet Neck Adjustment

Loosen the wooden finial, gently pull neck sections apart, measure, and secure.