Drivecon Crane Commander Series - Page 22

18
4.1.2 Component outline of small Crane Commanders
The main parts of Crane Commander series inverter are illustrated in Fig. 4.1b
Note: Model CC-207 shown. Appearance may differ from model to model.
Fig. 4.1b Component outline
Ground terminal
under D61530
TM1 Main
terminal under
D61530
TB1 of D61530
(D61531) with detach-
able strip. Caution: Use
screwdriver to dislodge.
Do not pull on wires.
D61530 TB1
(D61531)
All models
F R 2 3 4 5 ACN RLA RLC RLB
D61530 120VAC
(D61531 24VAC)
isolator. Shown
detached from
TM2.
CON4 Connector of
"ground fault
protection"
LED102
Running lamp green
LED101
Charged lamp red
Jumper 1
TM2 Control
terminal
Jumper 2
CON6 Connector of
digital operator inter-
face
CON12 Connector of
RS232 or RS485
L1 L2 L3 T1 T2 T3
TM1
(Power terminal block)
1 3 5 7 9 11 13 15
2 4 6 8 10 12 14 16
TM2
(Control terminal block)
CC-204-222
All models