Need help?Do you have a question about the Drivecon Crane Commander Series and is the answer not in the manual?
General| Brand | Drivecon |
|---|---|
| Model | Crane Commander Series |
| Category | Controller |
| Language | English |
Provides a general description of the Crane Commander series inverter and its PWM design.
Details the procedures for checking the unit upon receiving it from shipment.
Specifies ideal installation locations, temperature, and environmental conditions for optimal performance.
Details necessary clearances around the inverter for effective cooling and ventilation.
Provides detailed mounting dimensions for various Crane Commander models.
Lists the standard ratings for 230V and 460V Crane Commander models.
Summarizes common specifications across the CC series inverters.
Illustrates typical interconnection diagrams for traverse and hoist operations.
Guides on selecting appropriate wire sizes and circuit breakers for the inverter.
Provides instructions and best practices for grounding the inverter unit.
Highlights critical cautions and protection measures for safe wiring practices.
Identifies main components and terminals on the inverter's control board.
Describes the function and description of each terminal in the main circuit terminal (TM1).
Details specifications for internal inverter braking resistors across different models.
Instructions for mounting and connecting the 120VAC/24VAC input isolator.
Explains functions of control terminals (TM2) and related input/output interfaces.
Introduces the digital operator, its keys, LEDs, and basic operation modes.
Details the procedure for changing function parameters, accessing codes, and setting up the inverter.
Provides descriptions and ranges for various function codes (Fn0-Fn84).
Guides on loading defaults, quick sets, and emergency stop operations.
Lists critical checks to perform before initiating test runs for safety and correct operation.
Provides step-by-step instructions to verify motor rotation direction during test runs.
Overview of inverter adjustments and programming abilities via digital operator or remote terminals.
Illustrates examples of digital operator control and frequency command sequences.
Lists fault codes, their probable causes, and recommended actions for resolution.
Explains the meaning of different alarm LED signal patterns.
Details routine checks, cleaning, and safety precautions for maintaining the inverter.
Provides troubleshooting guides for common motor issues like not running or overheating.
Discusses EMC directives, filtering selection, and additional precautions for EMI/RFI.
Details the installation and function of optional ground fault protection units.
Provides instructions for installing the digital operator interface extension cable.
A comprehensive list detailing terminal numbers, names, and their functions.
Instructions specific to the D61530 (D61531) Input Isolator.
Information regarding schematic connection drawings and dimensional diagrams.
To Next Page