How to fix a DRIZAIR Dehumidifier that does not turn on?
If your DRIZAIR Dehumidifier isn't turning on, first ensure the unit is switched on and properly plugged into a functioning wall outlet. Check the power cord connection to make sure it's secure.
What to do if my DRIZAIR 1200 Dehumidifier collects too little water?
If your DRIZAIR Dehumidifier isn't collecting enough water, it could be due to the following reasons: 1. **Dry Air:** The room's humidity might be low. Verify this using a hygrometer. 2. **Low Temperature:** The room might be too cold. Try increasing the room temperature. 3. **Clogged Filter/Coils:** Check the filter and coils, and clean them if necessary.
Why is my DRIZAIR 1200 running but the room is still not dry?
If your DRIZAIR Dehumidifier is running but the room isn't drying, consider these factors: * **Time:** Ensure you've allowed sufficient time for the dehumidifier to dry the room. * **Air Movement:** Improve air circulation by using air movers. * **Infiltration:** Reduce the amount of moist air entering the room.
Why is my DRIZAIR 1200 Dehumidifier continuously in defrost mode?
If your DRIZAIR Dehumidifier is constantly in defrost mode, it's likely that the room temperature is too low. Try increasing the room temperature to resolve this issue.
General| Airflow | 350 CFM |
|---|---|
| Operating Temperature Range | 33° - 105° F |
| Weight | 117 lbs |
| Dimensions | 20” W x 20” D x 34.5” H |
| Water Removal Capacity | 144 PPD @ AHAM (80°F, 60% RH) |
| Dehumidification Capacity | 144 PPD @ AHAM (80°F, 60% RH) |
Introduces the DrizAir 1200 dehumidifier, highlighting its design for rugged, durable, and portable use in restoration and construction.
Provides critical safety instructions regarding unit modification, refrigerant hazards, electric shock, and operating conditions.
Guides users on registering their purchase and obtaining service, including required information for assistance.
Details the procedures for unpacking, installing the handle, setting up, positioning, and connecting the drain hose for operation.
Explains how to use the control panel, including turning the unit on/off and understanding display messages like CMPRSR DELAY.
Provides a table listing specific error codes, their causes, and recommended solutions for troubleshooting unit issues.
Instructs on purging the unit of water after a job, resting, pressing the PURGE button, and preparing for transport.
Provides guidelines for handling, storing, and transporting the unit carefully to prevent damage and ensure safety.
Details recommended maintenance tasks, including cleaning coils and checking components, with warnings for safety.
Lists common faults, their causes, and solutions, with advice on contacting service if problems persist.
Presents detailed technical specifications of the DrizAir 1200, including model, dimensions, power, and safety certifications.
Directs users to LegendBrands.com for more information and guides on proper disposal of the unit.
Outlines required safety procedures and steps for servicing, decommissioning, and handling R32 refrigerant in dehumidifiers.
To Next Page
