Drolet Escape 1800 User Manual

READ AND KEEP THIS MANUAL FOR REFERENCE
45554A
Printed in Canada 06-09-2012
Installation and Operation Manual
Escape 1800 Insert
US ENVIRONMENTAL PROTECTION
AGENCY PHASE II CERTIFIED
WOOD INSERT
Safety tested according to ULC S628,
UL 737 and UL 1482 Standards
by Intertek Testing Services
www.drolet.ca
Stove Builder International Inc.
250, rue de Copenhague, St-Augustin-de-Desmaures
(Quebec) Canada G3A 2H3
Tel: (418) 878-3040 Fax: (418) 878-3001
This manual is available for free download on the manufacturer’s web site. It is a
copyrighted document. Re-sale is strictly prohibited. The manufacturer may update this
manual from time to time and cannot be responsible for problems, injuries, or damages
arising out of the use of information contained in any manual obtained from unauthorized
sources.

Drolet Escape 1800 Specifications

General

Type	Wood Stove
Firebox Volume	2.4 cu. ft.
Burn Time	Up to 8 hours
EPA Certified	Yes
Fuel Type	Wood
Blower Included	Optional
Log Length	20 inches
Chimney Diameter	6 inches

Summary

Safety Information

1.1 Summary of Operation and Maintenance Cautions and Warnings

Key safety and operational cautions and warnings to follow for safe use.

Fuel

3.1 Materials That Should Not be Burned

List of prohibited materials to burn in the insert for safety and performance.

3.2 How to Prepare or Buy Good Firewood

Guidance on selecting, preparing, and drying firewood for optimal burning.

Operating Your Insert

4.3 Lighting Fires

4.4 Maintaining Wood Fires

Techniques for managing and maintaining wood fires for efficient heating.

4.5 Fan Operation

Maintaining Your Wood Heating System

5.1 Insert Maintenance

Routine checks and upkeep procedures for the insert's components.

5.2 Chimney and Chimney Liner Maintenance

Procedures for maintaining the chimney and liner for safety and performance.

5.2.2 How Often Should You Clean the Chimney?

Safety Information

7.1 Summary of Installation Cautions and Warnings

Critical safety precautions and warnings for the installation process.

7.2 Regulations Covering Insert Installation

Clearances to Combustible Material

8.3 Compliance of a Combustible Mantel Shelf

8.4 Positioning the Unit

8.5 Minimum Masonry Opening, Clearances to Combustibles, and Floor Protector

Details on opening size, clearances, and floor protection requirements.

The Venting System

9.1 General Venting System Overview

9.3 Suitable Chimneys and Liner Requirements

Specifications for chimneys and liners required for safe operation.

9.6 Minimum Chimney Height

9.8 Supply of Combustion Air