Drop X User Manual

Pool base and service hatch
Each site must be designed according to the situation and place. Special attention
must be paid to the realization of the pool base. The base must be level, load-bear-
ing and horizontal. The most suitable bases are made of concrete, gravel, wood
or some other hard base material. The base must be able to withstand a weight of
2,500kgwithoutsinkingordeforming.Pleasetakeintoconsiderationtheeectof
frost when designing the base.
There must be no less than 50 cm of space around the outdoor spa pool for any
required servicing measures. It must be possible to open the service hatches located
on each side of the pool without impediment. If you want to sink the pool into a
terrace, you will need to make separate service hatches in the terrace on each side of
the pool. The service hatches must allow the pool’s side panels to be opened and
provide enough room to work next to the pool if necessary. The manufacturer is
not liable for any damage caused by an incorrectly installed pool.
SERVICE HATCH
There must be no less than 50 cm of space around
the outdoor spa pool for any required maintenance measures.
Service hatches on each side of the pool should be possible to open in case of maintenance

Drop X Specifications

General

Brand	Drop
Model	X
Category	Swimming Pool
Language	English