Need help?Do you have a question about the Druck UNIK 5900 and is the answer not in the manual?
General| Brand | Druck |
|---|---|
| Model | UNIK 5900 |
| Category | Water Pump |
| Language | English |
Details of Druck Limited and its manufacturing facility in China.
Explains the intended use of UNIK pressure sensors for measurement and conversion.
Refers to data sheets for technical specifications and product model number explanations.
Details the sensor's components and operational principle based on the piezo resistive effect.
Describes typical markings on non-hazardous area pressure sensors, referencing Figure 2.
Checks upon receiving the sensor and general installation guidelines.
Precautions for operation, connection, and mounting of sensors in systems.
Instructions on sealing mating surfaces and connecting to a pressure source.
Details supply voltage and current consumption for different sensor models.
Describes sensor maintenance, visual inspection, and cleaning procedures.
Outlines the process for returning sensors for repair or calibration, including required details.
Discusses compliance with EMC directives and requirements for power supply and cabling.
Provides guidance on troubleshooting, identifying causes, and contacting the manufacturer for faults.
To Next Page
