Dry Air Gale Force Stand User Manual

OWNERS MANUAL
Gale Force/Clean Force Air Mover Stand Mounting Instructions
Read instructions before use.
Save these instructions
CONTENTS NEEDED:
• Both metal side brackets (Picture 1)
• Both shoulder pins (Picture 2)
• Both nylon spacers (Picture 3)
• 8- 1
1
⁄4” screws (Picture 4)
Remove the screws in the nut certs and discard screws.
Line up nylon spacer with metal side bracket and using
longer screws attach to the air mover.
Screw the shoulder pins into the center of each bracket.
Slide the shoulder pin into the notches on the stand. Aim
the air mover to desired position and insert both locking
pins through the holes to hold the air mover in position.
21
3 4
Picture 1 Picture 2
Picture 3 Picture 4

Dry Air Gale Force Stand Specifications

General

Brand	Dry Air
Model	Gale Force Stand
Category	Racks & Stands
Language	English

Summary

Air Mover Stand Mounting Instructions

Step 1: Remove Screws

Remove and discard screws from the nut certs before proceeding with mounting.

Step 2: Attach Side Brackets

Align nylon spacer with the metal side bracket and secure to the air mover using longer screws.

Step 3: Install Shoulder Pins

Screw the shoulder pins into the center of each metal bracket.

Step 4: Position and Lock Air Mover

Insert shoulder pins into stand notches, align air mover, and secure with locking pins.

Force 9 Air Mover Stand Mounting Instructions

Step 1: Attach Brackets to Fan

Attach side brackets to the air mover fan using 1/2" screws, circular part towards the center.

Step 2: Install Shoulder Pins

Screw both shoulder pins into the center of each bracket.

Step 3: Slide Pins into Notches

Slide the shoulder pins into the notches on the stand.

Step 4: Secure Air Mover

Aim the air mover and insert locking pins through holes to hold it in position.