To Next PageTo Next Page
Need help?Do you have a question about the DRYDEN AQUA DA-GEN TOUCH 90-RX and is the answer not in the manual?
Overview of the electronic control unit components and connections.
Description of the electrolysis cell and its associated parts.
Detailed explanation of the main display interface and its key information areas.
Configuration of electrolysis intensity and polarity for water treatment.
Interpretation of status lights, alarms, and system messages on the display.
Monitoring water temperature and controlling the heating function.
Settings for pH dosing pump, chlorine levels, and redox setpoints.
Display of filtration status and auxiliary relay states.
Managing the pool lighting system via the interface.
Guidelines for interacting with the touch screen controls.
Overview of the electrical power requirements for different DA-GEN models.
Methods for controlling filtration using external or internal timers.
Detailed connection points for pH, redox, chlorine, and temperature probes.
Connections for filter pump, lighting, dosing pumps, and auxiliary devices.
Wiring for external display and Wi-Fi module connections.
Adjusting alkalinity, pH, and chlorine levels for optimal water balance.
Recommendations for adding salt or magnesium chloride to the water.
Setting the display language and adjusting screen brightness.
Configuring system time, date, and network connection parameters.
Setting passwords, viewing cell hours, and accessing system info.
Adjusting sound preferences and other input configurations.
Adjusting target values for pH, redox, chlorine, and conductivity.
Connecting and calibrating the pH probe for accurate readings.
Connecting and calibrating the temperature probe.
Connecting and calibrating the free chlorine probe for disinfection control.
Calibrating the redox probe to measure oxidation-reduction potential.
Guidelines for manual adjustment of redox readings, not recommended.
Calibrating the conductivity probe for water salinity measurement.
Guidelines for manual adjustment of conductivity readings, not recommended.
Guidance on installing a variable speed pump for pool filtration.
Setting different speeds for filtration based on conditions like cover status.
Manually controlling the pool filtration pump operation.
Setting up timed filtration cycles for efficient pool maintenance.
Managing pool heating based on temperature and filtration periods.
Setting up automatic backwash cycles using the Besgo valve.
Turning pool lights on/off manually or with a timer.
Configuring automated lighting schedules and functions.
Adjusting color and pulse length for RGB LED spotlights.
Steps for connecting the DA-GEN unit to a Wi-Fi network.
Verifying Wi-Fi connection and registering the device online.
Locating the system node ID required for online registration.
How pool cover status affects filtration speed and operation.
Instructions for installing pool cover sensors for system integration.
Understanding the capabilities and default assignments of auxiliary relays.
Configuring relays for manual, automatic timer, or timed operation.
Renaming auxiliary relays to match connected devices.
Monthly checks for salt concentration, TDS, and cell inspection.
Procedure for cleaning the hydrolysis cell to remove incrustations.
Guidelines for general maintenance of filter, probes, and bottles.
Diagnosing problems with a blank display or power supply.
Troubleshooting issues with hydrolysis setpoint, chlorine levels, and cell status.
Addressing alarms, excess chlorine, rust, and polarity issues.
Resolving problems with dosing pumps, flow detection, and alarms.
Reminder to maintain correct chemical levels in the pool.
Important safety advice regarding filter cleaning and cell operation.
Notes on system adaptation time, child supervision, and chemical handling.
Visual guide to connecting probes and sensors to the control unit.
Wiring diagrams for pumps, lighting, and auxiliary devices.
Wiring for external display and Wi-Fi module connections.
Step-by-step guide to entering the service menu with a password.
Overview of default relay assignments for various pool functions.
Adjusting polarity reversal times for the hydrolysis cell.
Selecting and configuring the connected pool pump type.
Configuring specific settings for variable speed pumps.
Configuring pH pump operation, delay, and proportional scaling.
Settings for other pumps, including ON/OFF times and alarm handling.
Defining system response to dosing pump alarms and tank level signals.
Configuring the flow alarm (FL1) activation based on sensors.
Resetting component working hour counters, e.g., after cell replacement.
Setting the node address for multi-interface systems.
Configuring server and port for Wi-Fi module communication.
Wiring diagram for DA-GEN with Speck Badu Profi / Eco VS pumps.
Wiring diagram for DA-GEN with Pentair Intellicomm / Intelliflo pumps.
Wiring diagram for DA-GEN with Pentair Sta-Rite VS pumps.
Wiring diagram for DA-GEN with Schneider ATV 212 drives.
Wiring diagram for DA-GEN with Invertec Optidrive E2 drives.
Wiring diagram for DA-GEN with UWE EO PM systems.
General| Model | DA-GEN TOUCH 90-RX |
|---|---|
| Category | Water Filtration Systems |
| Capacity | Up to 90, 000 liters |
| Warranty | 2 years |
| Application | Residential/Commercial |
| Power Supply | 220-240V |
| Power Consumption | 30W |
| Filtration Media | Activated Carbon |
