117
Driving
06
vehicle and conform to the values written on
the tyre pressure label.
Check the pressures of the four tyres before
performing the reinitialisation.
The system does not advise if a pressure is
incorrect at the time of reinitialisation.
With the vehicle stationary, the system is
reinitialised via theDriving / Vehicletouch
screen menu..
► In this menu, select the “Vehicle settings” tab.
► In the page, select the "
Under-inflation
initialisation " function.
► Select "Yes" to confirm.
The reinitialisation is confirmed by the display of
a message and an audible signal.
Malfunction
These warning lamps come on in
the event of a malfunction.
A message appears, accompanied by an audible
signal.
In this case, the tyre under-inflation monitoring
function is no longer performed.
Have the system checked by a dealer or a
qualified workshop.
DS ConnectedCAM
(Depending on country of sale.)
This camera, installed at the top of the
windscreen and connected wirelessly, allows you
to:
– Take photos and videos on demand and share
them.
– Send the vehicle's GPS coordinates to a
smartphone.
– Record videos automatically in the event of a
vehicle impact.
As the use of the DS ConnectedCAM is
under your control and your responsibility,
you must comply with the regulations for the
protection of personal data (images of other
people, vehicle number plates, protected
buildings, etc.). Check first that your insurance
company accepts the footage collected from
the DS ConnectedCAM as evidence.
Without exception, any action which the
driver takes concerning the camera must
be with the vehicle stationary.
Operation
To use all camera functions, you must perform the
following operations:
► Download the DS ConnectedCAM application
onto a smartphone.
► Pair the smartphone with the camera
following the instructions given by the
application.
Pairing is necessary at the first connection. After
this it will be automatic.
The default pairing code is: “ConnectedCAM”.
On/Off
► Press and hold this button to switch
the camera on/off (confirmed by the
indicator lamp coming on/going off).
When the camera is switched on, video recording
is automatic and permanent.
The status of the function is stored when the
ignition is switched off.
Managing photos and videos
► Press this button briefly to take a
photo.
An audible signal confirms that the request has
been acknowledged.
► Press and hold this button to record a
video.
A micro USB socket also allows the data from
the camera to be saved onto other media such as
computers, tablets, etc.
To Next Page
Loading...
Need help?
General
