DS Automobiles DS 7 CROSSBACK User Manual

196
In the event of a breakdown
08
Access to the tools
The opening tool for the rear protective cover is
secured to the towing eye.
For more information on accessing the Tool kit,
refer to the corresponding section.
Towing your vehicle
To access the front screw thread:
► Unclip the cover by pressing at its top left-
hand corner.
Hybrid vehicles
Before any intervention, with the ignition on, depress the brake pedal and select mode N, then switch off the hybrid system (READY indicator lamp
off).
Always call on professionals for recovery of the vehicle on a flatbed lorry or trailer.
Use the towing eye onlyto free the vehicle where it is stuck, or to secure it for recovery on a flatbed lorry or trailer.
Towing constraints
Type of vehicle
(engine / gearbox)gearbox
Font wheels on the ground Rear wheels on the ground Flatbed 4 wheels on the ground with
towbar
Internal combustion /
Manual
Internal combustion /
Automatic
Hybrid 2WD
Hybrid 4WD
2WD: 2-wheel drive.
4WD: 4-wheel drive.
In case of battery or electric parking brake failure, it is essential to call a professional using flatbed recovery vehicles (excluding manual gearbox).

DS Automobiles DS 7 CROSSBACK Specifications

General

Brand	DS Automobiles
Model	DS 7 CROSSBACK
Category	Automobile
Language	English