EasyManua.ls Logo

DS Automobiles DS 7 CROSSBACK - Page 98

DS Automobiles DS 7 CROSSBACK
276 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
96
Safety
05
Recommended ISOFIX child seats
Also consult the user guide from the child
seat’s manufacturer to find out how to
install and remove the seat.
"RÖMER Baby-Safe Plus and its ISOFIX base"
(size category: E)
Group 0+: from birth to 13 kg
Installed "rearward facing" using an ISOFIX
base which is attached to ringsA.
Installed only on the front passenger seat or on
the rear side seats.
The base has a support leg, height-adjustable,
which rests on the vehicle's floor.
This child seat can also be secured with a seat
belt. In this case, only the shell is used and
attached to the vehicle seat using the three-
point seat belt.
"RÖMER Duo Plus ISOFIX"
(size category: B1)
Group 1: from 9 to 18 kg
Suitable for forward-facing installation only.
Attached to ringsA and ringB, referred to as
TOP TETHER, using an upper strap.
Only suitable for installation on the front
passenger seat or the rear side seats. The
head restraint on the vehicle seat must be
removed.
Three seat body angles: sitting, reclining, lying
down.
This child seat can also be used in seat
positions not equipped with ISOFIX mountings.
In this case, it must be secured to the vehicle's
seat by the three-point seat belt. Adjust the
front seat of the vehicle so that the child's feet
do not touch the backrest.
Locations for ISOFIX child seats
In accordance withEuropean regulations, this
table indicates the options for installing ISOFIX
child seats on seats in the vehicle fitted with
ISOFIX mountings.
In the case of universal and semi-universal ISOFIX
child seats, the ISOFIX size category, determined
by a letter from A to G, is indicated on the child
seat next to the i-Size logo.

Table of Contents

Related product manuals