Need help?Do you have a question about the DS18 CF-X8TP and is the answer not in the manual?
General| Brand | DS18 |
|---|---|
| Model | CF-X8TP |
| Category | Marine Equipment |
| Language | English |
Details nominal diameter, impedance, power handling, sensitivity, and frequency response.
Covers enclosure material, marine grade type, RGB LED details, grill type, and finish.
Details specifications for the woofer component.
Details specifications for the tweeter component.
Provides Thiele/Small parameters like equivalent volume, excursion, and Qts.
Details overall diameter, depth, and height of the speaker.
Illustrates physical dimensions with diagrams and measurements.
Crucial safety and preparation instructions to follow before installing the speakers.
Lists essential tools and equipment required for speaker installation.
Lists all items included in the product packaging, including speakers and hardware.
Diagram showing how to connect speakers with the LED control module (LED-BTC).
Diagram and wiring instructions for connecting speakers directly to the battery.
Remove speakers, find a good location, ensuring easy wiring and no movement impairment.
Instructions for using the hex wrench, drilling holes, connecting wires, and preparing the rubber pad.
Wrap rubber pad, align wire hole, push wire into tube, and lock the top clamp.
Secure safety rope, apply threadlocker, and adjust speaker angle for optimal dispersion.
Locate the spot to drill the tower bar for the 6 conductor wire insertion.
Route wire, connect speaker wire to system, and heat-shrink for water protection.
Instructions for removing the clamp and routing wires for flat mounting.
Depicts the standard tube mounting configuration for the speakers.
To Next Page
