Need help?Do you have a question about the DS18 DSP4.8BTM and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| THD | <0.01% |
| Frequency Response | 20Hz - 20kHz |
| S/N Ratio | >100dB |
| Output Connectors | RCA |
| PC Connection | USB |
| Resolution | 24-bit |
| Type | Digital Signal Processor |
| Bluetooth | Yes |
| Total Harmonic Distortion | <0.01% |
| Weight | 0.8 kg |
| Input Connectors | RCA |
| Remote Output Voltage | 12V |
Indicates when audio output reaches maximum level and generates distortion or limiter activation.
This light indicates that the Bluetooth device is successfully connected.
When lit, these LEDs indicate that audio input is reaching its maximum level.
This LED illuminates when the processor unit is turned on.
Connects the processor to the power supply, providing +12V, REM, and GND.
Resets all processor parameters to factory defaults by holding the key for 5 seconds.
Receives high impedance audio signals from sources like players or smartphones.
Sends properly processed audio signals to external amplifiers.
Provides essential safety and best practice instructions for installing the processor.
Offers solutions for common audio noise issues related to grounding and cable management.
Step-by-step guide to download the app, activate Bluetooth, and connect to the DSP4.8BTM.
Details available routing options and gain adjustment ranges for channels.
Specifies frequency response, cutoff frequencies, and attenuation types.
Describes input equalization bands and channel EQ parameters.
Covers time delay settings, threshold, attack, and release parameters for the limiter.
Details the types, connectors, and levels for audio inputs and outputs.
To Next Page
