Need help?Do you have a question about the DS18 DSP8.8BT and is the answer not in the manual?
General| Remote Output Voltage | 12V DC |
|---|---|
| Crossover | Yes |
| Bluetooth | Yes |
| Sample Rate | 48kHz |
| Bit Depth | 24-bit |
| Crossover Slope | 6dB/Oct, 12dB/Oct, 18dB/Oct, 24dB/Oct, 48dB/Oct |
| Phase | 0 / 180 degrees |
| Type | Digital Signal Processor |
| Connectivity | Bluetooth |
| EQ | 31-band |
Overview of system integration, wireless control, and physical design aspects.
Details on 32-bit DSP, 31-band EQ, adjustable crossovers, and audio delay.
Lists RCA outputs, speaker inputs, remote output, and wireless system control.
Details on +12V, GND connections, and power supply precautions.
Explanation of REM IN and REM OUT connections for amplifier control.
Description of RCA audio inputs supporting 8 channels.
Options for automatic turn-on: DC OFFSET and REM.
Port used for service and software updates only.
Details on Power, Bluetooth, and Update LED status indicators.
Adjusts input sensitivity from 200mV to 9V to match head unit output.
RCA audio outputs for connecting to amplifiers, supporting 8 channels.
Shows connection from the head unit's RCA or speaker outputs.
Details on connecting +12V and Ground wires.
Shows RCA input and output connections for audio signals.
Illustrates connecting speakers to amplifier outputs and amplifier connections.
Instructions to download the DSP8.8BT mobile application.
Introduces the EQ screen and recommends a setup order.
Explains setting up crossovers for a fully active 2-way system.
Example settings for tweeter, midrange, and subwoofer crossovers.
Instructions on checking and adjusting speaker phase using apps or meters.
Method for setting channel gains using pink noise for system balancing.
Options for refreshing device lists and resetting DSP tuning.
How to save, name, and manage Basic and Advanced tuning presets.
Detailed explanation of the 31-band parametric equalizer screen.
How to adjust the frequency for each of the 31 equalizer bands.
Final step to save and sync settings to the DSP8.8BT.
Details on working voltage, remote voltages, and fuse size.
Information on THD+N, frequency response, and input sensitivity.
Specs for EQ, Q Factor, and Crossover settings.
Details on DSP speed and precision.
Precision, dynamic range, and THD+N for DAC/ADC conversion.
Details on input/output levels, types, and physical dimensions.
To Next Page
