What to do if my DSC Cell Phone has SIM/Radio Trouble?
If you are experiencing SIM/Radio trouble with your DSC Cell Phone, ensure the SIM Card is inserted correctly and firmly. Also, ensure the antenna cable is plugged securely into the radio connector. Finally, ensure the power source connected to the 3G3070 is providing 13.8VDC @ 120mA and that the battery is fully charged.
What to do if my DSC Cell Phone has a wireless network problem?
If your DSC Cell Phone has a wireless network problem, ensure the SIM card has been activated and that the antenna cable is plugged securely into the radio connector. Also, ensure there is good signal strength (at least one green light ON). Finally, verify the installation area is not experiencing a network outage.
What to do if my DSC Cell Phone is displaying a telephone line trouble condition?
If the control panel of your DSC Cell Phone is displaying a telephone line trouble condition, ensure T1 and R1 of the 3G3070 are wired to the TIP and RING terminals of the control panel. If the 3G3070 is being used as the primary communicator, the yellow light will always be ON. If the 3G3070 red light is FLASHING, refer to the Red Light Status Chart.
What to do if my DSC Cell Phone displays a communication trouble condition?
If the control panel of your DSC Cell Phone displays a communication trouble condition, ensure the panel is programmed for Contact ID and that the control panel does not indicate a TLM trouble condition. If the 3G3070 red light is FLASHING refer to the Red Light Status chart in this guide.
What to do if the phone line is seized when the DSC 3G3070 Cell Phone is connected?
If the phone line is seized when the 3G3070 is connected, verify correct phone line wiring and ensure the Ringer Equivalency Number (REN) is not being exceeded on the line.
What to do if my DSC Cell Phone has a DC Supply Trouble?
If your DSC Cell Phone has a DC Supply Trouble, ensure the power source connected to the 3G3070 is providing 13.8VDC @ 120mA.
General| Brand | DSC |
|---|---|
| Model | 3G3070 |
| Category | Recording Equipment |
| Language | English |
Lists the key capabilities and functions of the 3G3070 device.
Details the technical parameters and requirements for the 3G3070.
Outlines the power supply, current consumption, and voltage ratings.
Provides a detailed explanation of the components and their functions.
Explains how the device mimics a landline connection.
Describes the feature that monitors panel communication attempts.
Details the sequence of events for GPRS data transmission.
Information on the four programmable inputs and their usage.
Procedure for enrolling and activating the 3G3070 with Connect 24.
Steps for site preparation, signal testing, and terminal connections.
Explains the meaning of red LED flashes for troubleshooting.
Describes yellow and green LED meanings for status and signal strength.
Explains how the device mimics a landline connection.
Describes the feature that monitors panel communication attempts.
Details the sequence of events for GPRS data transmission.
Information on the four programmable inputs and their usage.
Details programmable outputs and Contact ID event codes.
Explains system management features like shutdown and default reset.
Describes conditions leading to radio shutdown and LED indication.
Information on remotely configuring the device via Connect 24.
Guide to interpreting green LED status for signal strength.
Explains the meaning of the yellow LED for GSM/communication status.
Details the meaning of red LED flashes for troubleshooting.
Troubleshooting steps for line trouble and communication failures.
Diagnosing issues with no signals, flashing lights, or seized lines.
Information on 3G3070 enrollment, SIM activation, and status checking.
Details on critical shutdown and swinger shutdown for backup units.
Diagram showing general wiring connections for the 3G3070.
Diagram illustrating telephone line connections.
Diagram for power supply and supervision wiring.
Diagram for connecting to a Fire Alarm Control Unit.
Diagram for connecting to a DSC Subscriber Unit.
Diagram for remote mounting of DSC Subscriber Unit.
Diagrams for GSM supervision and redundant fire alarm connections.
Diagrams for GSM, phone line, and fire alarm supervision.
Details the terms and conditions for licensing the software product.
Outlines the warranty terms and limitations for the product.
Information regarding FCC rules, interference, and usage guidelines.
Details on Industry Canada technical specifications and compliance.
To Next Page
