Need help?Do you have a question about the DSC PC5010 and is the answer not in the manual?
General| Zones | 8 on-board, expandable to 32 |
|---|---|
| Partitions | 2 |
| User Codes | 32 |
| Event Buffer | 128 events |
| Communicator | Built-in |
| Keypads Supported | Up to 8 |
| Communications | Contact ID, SIA |
| Power Supply | 16.5V AC, 40VA |
| Battery Backup | 12VDC, 4AH |
| PGM Outputs | 2 |
| Compatibility | Supports DSC keypads and modules |
Details arming the system from LED and LCD keypads, including readiness checks and exit delays.
Procedure to disarm the system using an access code via an LED keypad.
Instructions for changing the system's Master Code.
How to program regular, duress, and partition master access codes.
Steps to remove existing access codes from the system.
How to temporarily disable specific zones using an LED keypad.
To Next Page
