'66HULHV0RWRUL]HG*DWHV
Malfunctions
12 Malfunctions
12.1 Safety
This chapter describes possible causes of malfunctions and trouble
shooting tasks.
Contact the manufacturer in case of malfunctions that cannot be
repaired by means of the following information. (For service
address, Refer to page 2)
General
WARNING
Danger of injury from inappropriate
troubleshooting!
Inappropriate troubleshooting can cause severe or
lethal injuries.
– All troubleshooting work must be performed by
specialists or electronics specialists.
– Prior to work, ensure that there is sufficient
assembly space.
– Pay attention to tidiness and cleanness at the
assembly site! Loosely stacked or lying around
components and tools are accident sources.
– Only use original spare parts or spare parts
approved of by '6,. Procure spareparts from
authorised dealers or directly fromthe
manufacturer. Refer to page 2 for address.
– If components have been replaced: Pay
attention to correct installation of the spare
parts. Reinstall all fastening elements correctly.
– Before restarting, ensure that all doors locked
properly.
Personal protective equipment
The following must be worn during troubleshooting work:
Work clothes
Protective gloves
Safety shoes.
Toll Free 800-272-3555 | 512-321-4426 | Fax: 512-321-9181
INS-DSMG-200702
Designed Security, Inc. - 1402 Hawthorne Street, Bastrop Texas 78602
www.dsigo.com | sales@dsigo.com
76
To Next Page
Loading...