SA1350/ CA1350D/ DT135D
P/N: 28-610-135010 OPERATION GUIDE
ENGLISH
BASIC OPERATION GUIDE
SA1350/ CA1350D/ DT135D
Digital Signage Appliance
Cloud Compung Appliance/ Thin Client
Embedded Controller/ System
ENGLISH
4
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131 hp://www.dtresearch.com
Copyright © 2012, DT Research, Inc. All Rights Reserved. DT Research is a registered trademark of DT Research, Inc.
BOG030912DT135ENG
INTRODUCTION
Thank you for acquiring the latest addion to DT Research
’
s product line - the SA1350/
CA1350D/ DT135D, featuring compact, robust designs and powered by the high-performance,
energy-efficient AMD Fusion processor. Combined with DT Research
’
s applicaon-specific
soware, these products provide digital signage, cloud compung, or embedded controller
compung soluons. These products also support major embedded operang systems such as
Linux, Microso® Windows® XP Embedded, Windows® CE, or Windows® Embedded Standard
7 for a variety of compung needs.
Package Contents
One SA1350/ CA1350D/ DT135D
AC/DC Power Adapter
VESA-compliant Mounng Bracket
Quick Start Guide
Basic Operaon Guide
Stand for vercal placement (CA1350D only)
Soware and User Guide (CA1350 Linux zero client and SA1350 only)
1
1
2 3 6
2
3
4
5
6
7
Opons
This product is designed to work with a range of custom and off-the-shelf opons to enhance its
applicability for various deployments.
• Built-in wireless LAN with external antenna
• Smart card reader module
(except for SA1350)
Note: The actual package contents may vary depending on the product acquired.
SA1350 Server Installaon and Appliance Registraon
Please refer to the corresponding User Guides for server soware installaon instrucons.
Aer turning on the SA1350 for the first me, a screen prompt is displayed for registering the
appliance. If the screen prompt is not shown, please follow the instrucons below:
Press and hold
“
1. Control + Shi + Space
”
to exit the WCM
Player soware.
Navigate
to 2. Start | All Programs | DT Research | WebDT
Signage Player
Select 3. Register WebDT Signage Player Again. The Player
Registraon screen should appear. Fill in all fields to register.
The required informaon is marked.
Click 4. OK to register and connect to the WebDT Signage
Appliance Publish Server.
NOTE: If your CA1350D comes with the smart card reader module, make sure the card slot faces up.
Step 1:
Remove the two side screws.•
Step 2:
Place the stand, screw and ghten the two M3 x •
10mm screws included in the package.
Stand Installaon for CA1350D
To Next Page
Need help?
General
