and the controller will be prepared in RECORD modality and trigger AUTO will
be ready.
Incongruent and incorrect programs will not be accepted and it will not be
possible to advance to the next step of the procedure until the correct data is
introduced.
This procedure, once bagan must always be completed in all its fazes otherwise
the preceding configuration will non be modified.
To activate the manual control of scanners the controller must be disposed in
RECORD or GAME modality by pushing the SCANNER key (the relative led
will be lighted on).
The 1- 16 leds lighted on show the projectors which were selected in the last
activation of the manual control.
Use the sliders and joystick to move the selected projectors.
Press the SCANNER key again to exit the manual function.
The unselected projectors which influence the record or game, will continue to
work automatically.
The controller allows the creation and memorisation of 4 records. Each record can
contain a maximum of 16 games.
Push the RECORD key. The relative led will be lighted on and the 1-4 leds show
record position.
the 1-4 leds lighted on show the programmed records.
the 1-4 leds lighted of show the empty records (not programmed)
the 1-4 leds flashing show the active record (being used)
With the 1-4 keys choose one of the programmed records (lighted on leds) or
one of the not programmed record to be now programmed.
The led game starts flashing indicating the executed selection.
If a programmed record is selected it will be immediately executed and the 1-16
leds lighted on show the memorised games in that record of which the flashing
one representing the game being executed.
If a not programmed led is selected the relative led is lighted on and all the others
are lighted of.
Press the key RECORD again for at least 2 seconds : The controller enters
programming mode of the selected record visualising the programmed games
on led 1-16.
The RECORD led starts flashing and the led game is lighted of.
Select the game to be inserted (among those programmed) with the 1-16 keys
MANUAL CONTROL OF SCANNERS:
(programming and modification)RECORD MODALITY