EasyManua.ls Logo

DTS NICK NRG 1401 - User Manual

DTS NICK NRG 1401
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Question and Answer IconNeed help?

Do you have a question about the DTS NICK NRG 1401 and is the answer not in the manual?

Summary

Symbols and Warnings Guide

Safety Symbols Guide

Visual indicators for electrical shock, general risk, and light source hazards.

Usage and Installation Symbols

Indicators for indoor use, flammable surfaces, and minimum distance requirements.

Environmental Compliance Symbol

Symbol indicating compliance with the Waste Electrical and Electronic Equipment directive.

General Warnings and Warranty

Technical Features Overview

Product Dimensions

Important Safety Information

Fire Prevention

Guidelines for safe placement and fire risk reduction.

Electric Shock Prevention

Precautions to avoid electric shock hazards.

General Safety Precautions

Covers eye safety, handling, installation, and ambient temperature limits.

Environmental Protection (WEEE)

Guidelines for recycling electrical equipment according to the WEEE directive.

Installation Guidelines

Safety Cable Installation

Instructions for securely attaching a safety cable to prevent falling.

Liquid Protection and Movement

Precautions against liquid contact and guidelines for fixture movement.

Fire Risk and Ventilation

Information on fire hazards, placement, and ventilation requirements.

Ambient Temperature Limits

Specifies the maximum allowable ambient operating temperature.

Mains Connection and Protection

Mains Protection

Recommendation for using a thermal magnetic circuit breaker for protection.

DMX Signal Connection

DMX Addressing and Selection

Explains DMX channel modes and how to set addresses for projectors.

Firmware Updating

Display Functions

Display Position Settings

How to set the display orientation (automatic, on ground, suspended).

Display Stand-by Mode

Options to turn off the display after a delay or keep it always on.

Wireless DMX Connectivity

Wireless DMX Logging On

Procedure for connecting the unit to a wireless DMX transmitter.

Wireless DMX Logging Off

Procedures for logging off the unit from a wireless DMX transmitter.

Emergency Mode Operation

Emergency Mode Settings

How to activate and use the emergency operating mode for specific cues.

System Information and Settings

Default Settings Restoration

How to restore the unit to its factory default settings.

Temperature Monitoring

Displays temperature readings for LED driver, display, and LED panels.

Voltage and Lifespan Monitoring

Shows supply voltage and unit/LED lifespan data.

System Settings Control

Pan and Tilt Inversion;Speed

Settings for pan/tilt movement direction and speed control.

Studio and Fan Speed Modes

Options for quiet operation (studio mode) and fan speed adjustment.

DMX Motor Reset Control

Enables or disables motor reset control via DMX.

Software Versions

Motor Board Software Version

Software version for the motors board (Pan&Tilt-Zoom).

LED Driver Software Version

Software version for the LED driver board.

Display Board Software Version

Software version for the display board.

Periodic Maintenance

Periodic Cleaning Procedures

Maintenance schedule and methods for cleaning lenses, fans, and air passages.

Periodic Control Checks

Regular checks for mechanical parts, electrical components, and fuse replacement.

DMX Protocol Modes

Shapes Mode DMX Protocol

Detailed DMX channel assignments and levels for the Shapes mode.

Extended Mode DMX Protocol

Detailed DMX channel assignments and levels for the Extended mode.

Sectors Mode DMX Protocol

Detailed DMX channel assignments and levels for the Sectors mode.

Compatibility Mode DMX Protocol

Detailed DMX channel assignments and levels for the Compatibility mode.

Notes

DTS NICK NRG 1401 Specifications

General IconGeneral
BrandDTS
ModelNICK NRG 1401
CategoryDJ Equipment
LanguageEnglish

Related product manuals