In
EFFECT
m&
there
are
6
fun&ian
ksye
see
[Fig.
32
par
7.11
W
key:
Press this key to start the effect.
The
key
becomes PAUSEthe display changes as shown in [Fig.
34
par
7.3)
PAUSE
key:
Press this key to stop the effect in the current position, pressing the
GO
key it
recovers from the same position.
SELECT
key:
Pressing this key it is possible the multiple selection of the effect. The display
changes
as shown in [Fig.
34)
see par
7.3
Fress one of the
1
+l
2
keys to select more effect .
For successive effects use the
PAGE
key.
RE?s"A
P
key:
Press this key to modify the number of repetitions of the effect, the value is in
number from
001
to
999
use the faders under the
REPEAT
writing, or the
encoder. For confirm the modify press the
OK
key, for get out of the function
press
the
ESC
key.
2ndRO
W
key:
Foi. faced or disposed on more rows scanners.
Pi-ess this key to modify the effect of the second half of the selected scanner.
-
!
he rnoclalities are:
NORMAL: No modification.
NO
DELAY: Keep the first scanner in phase, if there are DELAY.
!KV
PAN:
Reverses the movement of the mirror
X
axis
dNV
TbLT: Reverses the movement of the mirror
Y
axis
fNt%
ROT: Reverses the direction of the shape execution.
Use the fader under
2ndROW
write or the encoder. For confirm the modify
press the
OK key, for get out of the function press the
ESC
key.
EDIT
Key:
Press this key to create/modify the active effect, see par
7.5.
U?WS
keys
:
Press this key to set what unit will be active in the effect.
For successive units use the
PAGE
key.
To Next Page
Loading...