DU-HOOKY
Installation and Operational Instructions
Tools Required:
// 5/16” Socket // Drill or Impact Wrench
Installation Instructions:
Secure the mounting clip (Item B) to a convenient location in the bed of your pickup
truck using a 5/16” socket to secure the hex head self drilling screws (Item C).
We recommend installing over the wheel well as shown. The clip should not be more
than 18 inches from the end of the handle.
Note: You can also attach the mounting clip (Item B) to a wall in your shop or garage
to keep the DU-HOOKY (Item A) within reach at all times.
Operational Instructions:
Length Adjustment
Twist the Reach E-Z (Item A) shaft 1/4 turn counterclockwise, then pull to extend the
Reach E-Z (Item A). Twist the Reach E-Z (Item A) shaft 1/4 turn clockwise to tighten
at desired length.
Tip
Slide tip under the item you’re trying to retrieve, then turn the Reach E-Z (Item A) all
the way to the side, (so the front edge of the tip catches the lip of the bucket) then
pull the Reach E-Z (Item A) towards you, to retrieve items. This works great for
getting underneath and hooking into cardboard boxes, the bottom of buckets, and
anything else you can’t get the hook around.
Set Screw
To re-position the tip, loosen the set screw using a screwdriver, then turn the tip to
the desired position, and re-tighten the set screw. Do not over-tighten.
Note: Tip turned sideways or in its original position works great for hanging plants
and holiday decorations. Turned 180 degrees, it makes a good hook for retrieving
duck decoys and lines.
Handle
Remove the end cap from the handle by twisting the end cap counterclockwise. This
will reveal the threaded connector. The ice scraper accessory can be attached to
the threaded connector. Many other standard items with a female connector, such
as a paint roller, squeegee, or duster, can also be attached to the threaded connector.
Manufactured by DU-HA, Inc. // www.du-ha.com
phone: 1.866.306.DUHA (3842) // fax: 1.218.998.4013 // 306 Saint Andrews Street South, Fergus Falls, MN 56537
1
2
3
4
5
PART #70088
ENGLISH
ITEM QTY DESCRIPTION
1 Reach E-Z
1 Mounting Clip
2 Hex Head Self Drilling Screws
1
2
3
4
5
A
A
A
Set Screw
Tip
Tip
End Cap
A
B
C
B
C
To Next Page
Need help?
General