Dual 1009 F Service Manual

Ura
••••••••
Crleiggenranrigrläg:
Dual
Technical
Data:
Current:
Line
voltage:
Drive:
Power
consumption:
Current requirements:
Turntable speeds:
Speed adjustment:
Turntable:
Wow and flutter:
Rumble:
Signal-to-noise ratio:
Tonearm:
Pickup cartridge:
Weight:
Dimensions and mounting cutouts:
* In accordance
with DIN 45500
E.
• M
L w
Lqjjljji
no,
Funiet mim
''
fra"
;::- 113 InalzU
ablillinerr
lim
.
First
Edition E 9 F
Alternating, 50 or 60
cycle, with
appropriate motor pulleys
selector
for 110 or
220 volts
four-pole,
single-phase, induction
motor
6.5
watts
approximately
50 ma maximum
at
220V,
50 cycle; 90
ma maximum at 117 V,
60 cycle
78, 45
and 33 1/2
r.p.m.
adjustment
range of 6 ' 3 / 0 at all three
turntable speeds
non-magnetic, 4 lb., Hi-Fi
turntable
Less
than ±
0.12%
less than 38 dB
below signal level *
less
than 56 dB below signal
levet *
balanced on all three
axes, extremely low mass, and
precision, friction-free suspension
(vertical and horizontal
friction bearing friction less than 0.04
gm)
tonearm will accept all
cartridges with
1 / 2
" mounting and
weighing from 1-13 gms.
11 lbs.
without
packing
see
installation
instructions
DUAL
GEBRÜDER
STEIDINGER • 7742
ST.GEORGEN/SCHWARZWALD
V381
4/768
engl. H
Printed in
Germany
Download from www.dual.de
Not for commerical use

Dual 1009 F Specifications

General

Effective length	222 mm
Speeds	33, 45 rpm
Wow and flutter	0.1%
Drive type	Idler-wheel drive
Tonearm	Static balance, tubular