Need help?Do you have a question about the Dual 1219 and is the answer not in the manual?
Instructions for unpacking the 1219 when purchased as a separate component.
Details on mounting the Dual 1219 chassis onto its base using spring-mounted footings.
Information on connecting the 1219 to the power line, including voltage settings and switch features.
Guidance on connecting the turntable to amplifiers using DIN or RCA connectors.
Instructions for operating the turntable in single-play mode using the mode selector.
Instructions for operating the turntable in multi-play mode with multiple records.
Details on automatic start, manual start, interrupting, resuming, and stopping playback.
Step-by-step guide to mounting or replacing a phono cartridge on the tonearm head.
Procedure for balancing the tonearm and setting the stylus force dial to zero.
Detailed steps for achieving precise tonearm balance and horizontal alignment.
Instructions on setting the correct stylus tracking force for optimal performance.
Guidance on adjusting anti-skating force based on stylus type and tracking force.
Explanation of how the mode selector maintains the correct vertical tracking angle.
Details on pitch control for speed adjustment and the cue-control for tonearm movement.
Instructions for changing the motor pulley to adapt the unit for different power frequencies.
Procedure for removing and replacing the turntable platter's securing spring-clip.
Guide to adjusting the tonearm's landing position on the record surface.
Information on lubrication, service agencies, and detailed technical specifications.
Instructions for unpacking the 1219 when purchased as a separate component.
Details on mounting the Dual 1219 chassis onto its base using spring-mounted footings.
Information on connecting the 1219 to the power line, including voltage settings and switch features.
Guidance on connecting the turntable to amplifiers using DIN or RCA connectors.
Instructions for operating the turntable in single-play mode using the mode selector.
Instructions for operating the turntable in multi-play mode with multiple records.
Details on automatic start, manual start, interrupting, resuming, and stopping playback.
Step-by-step guide to mounting or replacing a phono cartridge on the tonearm head.
Procedure for balancing the tonearm and setting the stylus force dial to zero.
Detailed steps for achieving precise tonearm balance and horizontal alignment.
Instructions on setting the correct stylus tracking force for optimal performance.
Guidance on adjusting anti-skating force based on stylus type and tracking force.
Explanation of how the mode selector maintains the correct vertical tracking angle.
Details on pitch control for speed adjustment and the cue-control for tonearm movement.
Instructions for changing the motor pulley to adapt the unit for different power frequencies.
Procedure for removing and replacing the turntable platter's securing spring-clip.
Guide to adjusting the tonearm's landing position on the record surface.
Information on lubrication, service agencies, and detailed technical specifications.
General| Speeds | 33 1/3, 45, 78 RPM |
|---|---|
| Pitch Control | Yes |
| Cartridge Weight Range | 1-12g |
| Platter Material | Aluminum |
| Rumble | -63dB (weighted) |
To Next Page
