Please read entire manual before installation.
• Disconnect negative battery terminal.
(consult a qualified technician for instructions)
• Avoid installing the unit where it would be subject to high temperatures,
such as from direct sunlight, or where it would be subject to dust, dirt or
• Insert the supplied keys into the slots as shown, and slide the unit out of
• DIN mounting procedure:
Install mounting sleeve into radio opening, bending tabs to secure.
• 2-Shaft mounting procedure:
Remove knobs, faceplate and DIN mounting adapters from unit.
Install unit into kit or radio opening from behind. Adjust rear shaft nuts to
correct depth. Install faceplate and knobs.
• Certain applications may require an installation kit and/or wiring harness
adapter (sold separately).
To Next Page
Loading...
