Need help?Do you have a question about the Dual MXC22 and is the answer not in the manual?
Audio Specifications| signal-to-noise ratio | >40 dB |
|---|---|
| frequency response (FM) | 60 Hz - 6.3 kHz, ±3 dB |
| frequency response (AM) | 80 Hz - 2 kHz, ±3 dB |
Tuning Range| FM tuning range | 87.5 MHz - 107.9 MHz |
|---|---|
| AM tuning range | 530 kHz - 1700 kHz |
Power| total system power | 30 Watts |
|---|---|
| peak power output | 15 Watts x 2 @ 14.4 VDC |
| power supply | 11-16 VDC, negative ground |
Physical Specifications| dimensions | 7.5" x 7" x 2.38" (191 x 178 x 60 mm) |
|---|---|
| speaker output impedance | 4 ohms |
| fuses | 3 amp fast blow AGC, .5 amp fast blow AGC |
Safety and installation guidelines before beginning the setup process.
Initial steps for removing the unit from its sleeve and preparing for installation.
Procedure for installing the unit using the DIN mounting sleeve and adapters.
Method for installing the unit in a 2-shaft radio opening or using an installation kit.
Description of the ON/OFF and Volume control knob.
Explanation of the BAND button for selecting AM/FM frequencies.
Function of the ST indicator for FM stereo reception.
Function of the FM indicator light.
Function of the MO/ST button for FM reception modes.
Operation of the TUNE knob for station selection.
Function of the BAL knob for audio balance adjustment.
Operation of the BASS button to activate/deactivate bass boost.
Port for connecting external audio devices via 3.5mm jack.
Button for ejecting cassettes and fast-forwarding.
Instructions for turning the unit on and off using the power knob.
How to begin cassette playback by inserting a cassette.
How to activate tuner operation by turning the power knob or ejecting a cassette.
Connecting and listening to portable devices via the auxiliary input.
How to select radio stations using the TUNE knob.
Selecting mono or stereo reception for FM broadcasts.
Switching between FM and AM broadcast bands.
Process for inserting a cassette to initiate playback.
How to stop and eject a cassette from the unit.
Instructions for fast forwarding a cassette tape.
Details on the warranty coverage for original retail purchasers in the USA.
Specifies what defects in material and workmanship are covered by the warranty.
Steps to follow when requiring warranty service, including troubleshooting and shipping.
Limitations on the warranty regarding implied warranties and consequential damages.
Technical details for the cassette player, including signal-to-noise and frequency response.
Technical details for the FM tuner, including tuning range and frequency response.
Technical details for the AM tuner, including tuning range and frequency response.
Overall system power, output, supply, impedance, fuses, and dimensions.
To Next Page
