19
YOUR FOOD PROCESSOR WON’T WORK UNLESS THE
LID IS LOCKED IN PLACE. DO NOT REMOVE THE LID
UNTIL THE BLADE OR DISC HAS STOPPED TURNING.
• When you have assembled the right bowl(s) and
accessories for the job you want to do, align the
locking pins in the lid with the slots on the rim of the
large bowl
• To lock, rotate the lid clockwise 30 degrees until the
tab aligns with the top of the bowl handle.
You will hear a click to confirm that the lid is now
locked on
• When opening the lid, ensure the blade or disc has
stopped turning, the control knob is in the off
position and the processor is unplugged at the
socket
• To remove, hold the bowl handle with one hand and
turn the lid anti-clockwise with the other hand. Lift it
up and off
•
AAllwwaayyss ssttoorree tthhee pprroocceessssoorr wwiitthh tthhee lliidd uunnlloocckkeedd..
OONNLLYY UUSSEE TTHHEE PPUUSSHHEERR TTHHAATT CCOOMMEESS WWIITTHH T
THHIISS
AAPPPPPPLLIIAANNCCEE;; DDOO NNOOTT UUSSEE AANNYYTTHHIINNGG EELLSSEE TTOO
PPUUSSHH FFOOOODD DDOOWWNN TTHHEE FFEEEEDDEERR TTUUBBEE..
Always ensure the food pusher is in place before you
start using your processor.
• Pack ingredients tightly in the feeder tube so that
they produce uniform pieces
• The food pusher doubles as a measure, with a lid for
your convenience.
ASSEMBLING AND USING YOUR PROCESSOR
LID
FEEDER TUBE AND FOOD PUSHER
To Next Page
Loading...
Need help?
General
