Dualsky FC120 - SET Button Usage; LED Status Indicators

- 14 -
● “SET”Button usage:
⑴
.Long Press (more than 2 sec) : enter Setting Mode
⑵
.Single click in Setting Mode: switch between SETTING ITEM
⑶
.Double click (finish within 0.5sec) in Setting Mode: change
SETTING VALUE
⑷
.Long Press in Setting Mode: Save and quit to flight mode
● Please check the chart below for all settings
- 13 -
LED Status
LED1 STATUS
Green flashing
Green solid
Red solid
FC120 STATUS
Initializing
Initialization
completed, signal OK
Initialization
completed, no signal
LED2 STATUS
Blue on for 0.5 second
Green on for 0.5 second
FC120 STATUS
In gyro off mode
In aerobatic mode
Blue
(default)
Normal
Green
Delta
wing
Red
V-tail
Yellow
Blue Install direction
Face
down
Face
right
Face
left
L1(LED)
Green Airplane type
Face up
Item
L2(LED)