Ducane AC10B18 User Manual

FEATURES
Durable Copeland
®
compressors, with internal pressure relief
valves and inherent thermal protection
High quality Ducane made condenser coil with copper tubing and
enhanced louvered fin for maximum heat transfer capability
Permanently lubricated condenser fan motor
Top discharge directs hot air and sound away from
living area and shrubbery
All units run tested
Heavy gauge, textured, pre-painted cabinet provides
corrosion and abrasion protection
Easy access to electrical panels, pre-wired for easy hook-up
Hinged control panel allows simple access to
internal components
Service valve gauge ports positioned to allow
plenty of access room
Warranties: 5 year parts; 5 year compressor
(see warranty certificate for details)
Liquid line filter drier installed in every unit
All units ETL, ETLC approved and ARI listed
Charged for 15 feet of interconnecting tubing
Crankcase heaters standard on all 3-phase models with
reciprocating compressors
AC10B
Ducane Air Conditioner
UNIT DIMENSIONS
MODEL SQUARE BASE HEIGHT
NUMBER (INCHES) (INCHES)
AC10B18 22 1/2 x 22 1/2 23 1/2
AC10B24 22 1/2 x 22 1/2 23 1/2
AC10B30-A 22 1/2 x 22 1/2 23 1/2
AC10B36-B, 36TA, 36F 22 1/2 x 22 1/2 27 1/2
AC10B42-A 22 1/2 x 22 1/2 31 1/2
AC10B48-A, 48TA, 48FA 22 1/2 x 22 1/2 31 1/2
AC10B60-A, 60T, 60F 30 x 30 27 1/2
T = 208/230V 3 Phase; F = 460V 3 Phase.
OUTDOOR INDOOR AIRFLOW NET CAPACITY SEER
UNIT SECTION (SCFM) (BTUH/HR) (BTUH/WATT)
AC10B18 ACC18AA 600 18,200 10.20
AC10B24 ACC24AA 800 23,400 10.00
AC10B30-A ACC30AA 1000 29,200 10.20
AC10B36-B, 36TA ACC36BA 1200 34,600 10.00
AC10B42-A ACC42BA 1400 40,000 10.00
AC10 B48-A, 48TA, 48FA ACC48CA 1500 45,500 10.00
AC10B60-A ACC61CA 1800 58,500 10.00
AC10B60T, 60F ACC61CA + TDR 1800 59,000 10.00
Certified in accordance with the ARI Standard 210/240 certification program, which is based on ARI Standard 210/240.
THE DIFFERENCE IS QUALITY
®
www.ducanehvac.com
R

Ducane AC10B18 Specifications

General

Tonnage	1.5 Tons
Cooling Capacity	18, 000 BTU/h
Power Supply	208/230V, 1 Phase, 60 Hz
Refrigerant	R-410A
Energy Efficiency Ratio (EER)	11

Summary

PRODUCT FEATURES

Key Product Features

Overview of compressor, coil, cabinet, access, and warranty details.

INSTALLATION AND START-UP INFORMATION

Safety, Location, and Line Sets

Safety warnings, unit location, foundation, and refrigerant line installation.

SYSTEM PREPARATION AND WIRING

Refrigerant Line Sets and Connections

Proper installation of refrigerant lines, brazing, and leak checks.

Evacuation and Electrical Connections

Procedures for system evacuation and electrical connections.

Control Wiring

Guidelines for low-voltage control wiring based on distance.

SYSTEM START-UP AND CHARGING

System Start-Up Procedure

Steps for initial system start-up and thermostat settings.

Refrigerant Charge Adjustment

Procedures for adjusting refrigerant charge for piston and TXV systems.

UNIT MAINTENANCE

Regular Maintenance Tasks

Annual inspection, cleaning of coils, filters, and drains for optimal performance.

HOMEOWNER OPERATION

Room Thermostat and Fan Control

Guide on using room thermostat and fan settings for comfort.

Important System Information

Advice on air filters, airflow, heat pump defrost, and energy savings.

SYSTEM TROUBLESHOOTING

Troubleshooting Before Service Call

Steps to check before calling for service and advice for specific conditions.