Ducane AC10B30-A User Manual

FEATURES
Durable Copeland
®
compressors, with internal pressure relief
valves and inherent thermal protection
High quality Ducane made condenser coil with copper tubing and
enhanced louvered fin for maximum heat transfer capability
Permanently lubricated condenser fan motor
Top discharge directs hot air and sound away from
living area and shrubbery
All units run tested
Heavy gauge, textured, pre-painted cabinet provides
corrosion and abrasion protection
Easy access to electrical panels, pre-wired for easy hook-up
Hinged control panel allows simple access to
internal components
Service valve gauge ports positioned to allow
plenty of access room
Warranties: 5 year parts; 5 year compressor
(see warranty certificate for details)
Liquid line filter drier installed in every unit
All units ETL, ETLC approved and ARI listed
Charged for 15 feet of interconnecting tubing
Crankcase heaters standard on all 3-phase models with
reciprocating compressors
AC10B
Ducane Air Conditioner
UNIT DIMENSIONS
MODEL SQUARE BASE HEIGHT
NUMBER (INCHES) (INCHES)
AC10B18 22 1/2 x 22 1/2 23 1/2
AC10B24 22 1/2 x 22 1/2 23 1/2
AC10B30-A 22 1/2 x 22 1/2 23 1/2
AC10B36-B, 36TA, 36F 22 1/2 x 22 1/2 27 1/2
AC10B42-A 22 1/2 x 22 1/2 31 1/2
AC10B48-A, 48TA, 48FA 22 1/2 x 22 1/2 31 1/2
AC10B60-A, 60T, 60F 30 x 30 27 1/2
T = 208/230V 3 Phase; F = 460V 3 Phase.
OUTDOOR INDOOR AIRFLOW NET CAPACITY SEER
UNIT SECTION (SCFM) (BTUH/HR) (BTUH/WATT)
AC10B18 ACC18AA 600 18,200 10.20
AC10B24 ACC24AA 800 23,400 10.00
AC10B30-A ACC30AA 1000 29,200 10.20
AC10B36-B, 36TA ACC36BA 1200 34,600 10.00
AC10B42-A ACC42BA 1400 40,000 10.00
AC10 B48-A, 48TA, 48FA ACC48CA 1500 45,500 10.00
AC10B60-A ACC61CA 1800 58,500 10.00
AC10B60T, 60F ACC61CA + TDR 1800 59,000 10.00
Certified in accordance with the ARI Standard 210/240 certification program, which is based on ARI Standard 210/240.
THE DIFFERENCE IS QUALITY
®
www.ducanehvac.com
R

Ducane AC10B30-A Specifications

General

Brand	Ducane
Model	AC10B30-A
Category	Air Conditioner
Language	English

Summary

FEATURES

Compressor and Coil Features

Highlights durable compressors with internal protection and high-quality condenser coils for superior heat transfer.

UNIT SPECIFICATIONS

Unit Motor and Compressor Specs

Details unit fan motor HP, liquid/vapor line connections, rated voltage, phase, frequency, load amps, and fuse sizes.

SAFETY PRECAUTIONS

Handling and Refrigerant Safety

Advises protective gear, power verification, fan area caution, fire extinguisher, R-22 hazards, and unit handling.

REFRIGERANT SYSTEM PREPARATION

Brazing, Leak Check, and Evacuation

Covers brazing safety, leak detection methods, refrigerant release compliance, and factory charge details.

OPENING SERVICE VALVES

Valve Stem Operation

Details how to open service valves using a hex wrench and back-up wrench, cautioning against retainer ring dislodging.

ELECTRICAL AND CONTROL WIRING

Safety, Codes, and Wiring Specs

Covers electrical safety, NEC compliance, grounding, fuse selection, and control wire gauge based on distance.

PRE-START PROCEDURE

Pre-Start Inspection Checklist

Ensures service valve caps are tight, voltage matches rating, wiring is secure, and indoor fan speed is correct.

SYSTEM CHARGING PROCEDURES

Start-Up, Charge Adjustment, and Piston Superheat

Covers initial operation, adjusting charge based on line sets, and piston superheat measurement.

TROUBLESHOOTING BEFORE SERVICE CALL

Initial System Checks

Guides users to check thermostat settings, air filters, disconnect switches, circuit breakers, and outdoor unit for blockages.

Electrical Safety Reminder

Crucial warning to turn OFF electric power before performing any maintenance or removing panels to prevent injury or death.