To Next PageTo Next Page
Need help?Do you have a question about the Ducane AC10B60-A and is the answer not in the manual?
General| Cooling Capacity | 60, 000 BTU |
|---|---|
| Energy Efficiency Ratio (EER) | 10.0 |
| Voltage | 208/230V |
| Tonnage | 5 Ton |
| Type | Air Conditioner |
| SEER Rating | 13 |
Essential safety measures and warnings for installation personnel, including personal protective equipment and electrical safety.
Proper placement and clearance requirements for the outdoor condensing unit to ensure optimal performance and service access.
Guidance on selecting, installing, and routing refrigeration lines, including material and length considerations.
Recommended method for making braze connections to refrigerant lines, emphasizing safety and proper technique.
Instructions for checking refrigeration lines for leaks and performing system evacuation using a vacuum pump.
Procedures for evacuating the system and initial refrigerant charging based on factory pre-charge.
Guidelines for connecting power supply, wiring, and ensuring proper fusing for safe and effective operation.
Information on low-voltage control wiring, including recommended wire size and connection points.
Steps for initial system start-up, including thermostat settings and refrigerant charge verification.
Detailed steps for adjusting refrigerant charge in piston systems using superheat calculations.
Detailed steps for adjusting refrigerant charge in TXV systems using subcooling calculations.
Explanation of the automatic defrost system operation and adjustment for heat pump units.
Instructions for inspecting, cleaning, or replacing air filters to maintain optimal system performance.
Guidance on cleaning the indoor coil to remove dust accumulation for efficient operation.
Procedures for cleaning outdoor condenser coils to remove debris and ensure proper airflow.
Recommendations for maintaining the unit's painted finish, including waxing and avoiding sprinkler spray.
