Ducane Fits-All 92 User Manual

FEATURES
92.1% AFUE
Heating input range 50,000 – 125,000 BTUH
Cooling capacity supported 1 1/2 - 5 ton
Upflow/horizontal-left application flexibility
Electronic air cleaner connection (115V)
Humidifier connection (115V)
5 amp fused low voltage circuit protection
Time delay off for air conditioner SEER enhancement
Twinning compatible
WARRANTY
Limited lifetime warranty on heat exchanger, 5-year limited
warranty on covered components (see warranty certificate for details)
HEAT EXCHANGER ASSEMBLY
Crimp-Tite
TM
crimped aluminized steel primary heat exchanger
for longer life and safe operation
Stainless steel secondary heat exchanger maximizes durability
and efficiency
VENTING
Category IV appliance
Can be vented horizontally or vertically using 2” or 3” Schedule
40 PVC, ABS, or CPVC (see installation manual for details)
Approved for 2-pipe (direct vent) or single-pipe applications
Approved for installations with listed concentric vent kit
CONTROLS
Integrated furnace control with LED diagnostics for
fast, accurate troubleshooting
SAFETY
CSA certified for US and Canada
Safety limit prevents overheating
CABINET
Heavy-gauge, insulated cabinet provides strength and quiet comfort
Ducane diagnostic sleeve for fast, safe troubleshooting
INDOOR AIR BLOWER
Three-speed PSC blower motor
FITS-ALL 92
™
Ducane Gas Furnace
UPFLOW/HORIZONTAL-LEFT MODELS
THE DIFFERENCE IS QUALITY.
™
WWW.DUCANEHVAC.COM

Ducane Fits-All 92 Specifications

General

Brand	Ducane
Model	Fits-All 92
Category	Furnace
Language	English

Summary

Furnace Features and Specifications

High Efficiency and Capacity

Details AFUE rating, heating input, and cooling capacity.

Installation Flexibility

Covers airflow configurations and electrical connections.

Warranty Details

Outlines limited lifetime heat exchanger and component warranties.

Heat Exchanger Design

Describes primary and secondary heat exchanger materials and construction.

Venting Requirements

Specifies appliance category, materials, and configurations.

Control and Safety Systems

Details integrated control, diagnostics, and overheating protection.

Cabinet and Blower

Describes cabinet construction and the three-speed blower motor.

Detailed Unit Specifications

Gas and Heating Performance

Specifies gas type, input rate, heating capacity, and AFUE.

Operational Parameters

Lists temperature rise, electrical requirements, and static pressure.

Component Specifications

Details blower motor, heat exchangers, and transformer.

Venting and Controls Specs

Covers flue pipe connections, limit controls, and gas valve.

Shipping Information

Provides shipping weights for different models.

Air Flow and Venting Data

Blower Air Flow Performance

Shows airflow volumes (CFM) at different speeds and static pressures.

Maximum Vent Lengths (2-inch)

Specifies allowable maximum vent lengths for 2" PVC piping.

Maximum Vent Lengths (3-inch)

Specifies allowable maximum vent lengths for 3" PVC piping.

General Layout and Accessories

Furnace Dimensions and Openings

Details unit dimensions and supply/return duct opening sizes.

Installation Diagram

Illustrates the upflow/horizontal left physical layout.

Available Accessories

Lists conversion kits, filter racks, and vent termination kits.