J
Jeanette LawrenceAug 11, 2025
What to do if my Ducar DPT50 has no pump output?
- CCaitlin MoraAug 11, 2025
If your Ducar Water Pump has no output, start by priming the pump. Ensure the suction hose isn't collapsed, cut, or punctured—replace it if necessary. Make sure the strainer is completely underwater and free from clogs; clean it if needed. Check for air leaks at the connector, replacing the sealing washer and tightening the hose connector and clamp if necessary. Also, make sure that the engine does not lack power. If the head is excessive, relocate the pump and/or hoses to reduce it.