EasyManua.ls Logo

Ducati PRO-II - Page 26

Ducati PRO-II
148 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNINGS
Read the manual and instructions below in full before using the product.
Product name: Ducati Pro2
Product type: Electric scooter
Year of production: 2020
• Note: To recharge this electric scooter use ONLY the supplied charger labelled
ZH42V1.7ALi with the following output voltage: 41.5V - 1.7A.
Using another type of charger can damage the product or pose other potential risks.
• Never leave the product to charge unsupervised.
• The charging period of the product must not exceed four hours. Stop charging
after four hours.
• The product should only be charged at temperatures between 0 °C and 45 °C.
• If charged at lower or higher temperatures, there is a risk that the battery will offer
reduced performance, potentially resulting in damage to the product and personal
injury.
• The product must be used only at temperatures between -10 °C and 45 °C.
• If used at lower or higher temperatures, there is a risk that the battery will offer reduced
performance, potentially resulting in damage to the product and personal injury.
• Store the product at temperatures between 0 °C and 35 °C (the optimum storage
temperature is 25 °C)
Recharge and store in a dry and open place, away from combustibles (i.e. any flammable
element).
• Do not recharge in sunlight or near open flames.
• Do not recharge the product immediately after use. Allow the product to cool for
an hour before charging.
• If you are away for a certain period of time, for example for holidays, and you
entrust the device to a third party, leave it in a partially charged state (20-50%
charge). Not fully charged.
• The product is often supplied partially charged. Leave it in this state until it is ready
to be used.
24

Related product manuals