meter
Power button
Buzzer cue
Mode switching
1. Boot-up Tip: in shutdown slate, press the power button for a
second and buzzer sound at the same time.
2. Turn-off Tip: When on, press the power button for two
seconds, and buzzer sounds at the same time.
3. Turn on the headlight prompt: in the boot state, click the
power button and buzzer sounds at the same time.
4. Mode switch prompt: In boot state, double-click the power
button and buzzer sounds to indicate the mode switch is
successful.
Mode switching: boot state, double-click power button mode
switching: while light motion mode.
Automatic shutdown
3 minutes without opertaion buzzer rings 2 seconds in advance, 2
seconds later, automatic shutdown.
Rotary blocking protection
After blocking the motor for 2 seconds, the controller protects
no output, and the controller can aoutput normally only after
reregulating the speed.
Display
2. Functions and schematics
06
To Next Page
Loading...
