7
Carefully lower MATTRESS SUPPORT PANEL
C
with labels facing up.
Align corner-holes to sit on MATTRESS SUPPORT PINS .
E
8
The MATTRESS SUPPORT PANEL
C
may be installed in one of four positions.
See the four different mattress-support-holes in each corner of the CRIB.
First, select the desired mattress height. Then, unscrew the MATTRESS SUPPORT
PIN
E
from each MATTRESS SUPPORT BOLT
D
. . Insert the smooth ends
of each MATTRESS SUPPORT PIN
E
in the desired mattress-support-holes on
SIDE RAILS
B
. See drawing for proper pin orientation.
E
corner-holes
C
To Next Page
Loading...