Dudley TURBO EDGE - User Manual

To Next Page

IMPORTANT NOTES

Before installation ush supply pipes and

ensure cistern is clean and free from debris.

No sealing compound, paste, ux or solvent

to be used in contact with plastic or rubber

surfaces to avoid damage. Rubber washers

will provide adequate seal. PTFE tape may

be used on threads. No chemical block/

additive to be used in this cistern.

Do not over-tighten plastic fasteners. Hand

tight + ¼ turn is recommended and should

provide an adequate seal.

TURBO EDGE

3-PART ADJUSTABLE SYPHON

WATER LEVEL

COUPLED

ONLY

2mm

DEBURR

RETRO-FIT

NEW INSTALL

CONTINUED...

Need help?

Do you have a question about the Dudley TURBO EDGE and is the answer not in the manual?

Summary

Step-by-step guide for a new installation, including deburring.

Instructions for retro-fitting the syphon, showing component connections.

Illustrations detailing the assembly and connection of the syphon components.

Table showing flush volume settings based on component configuration (A, B, C).

General