Do you have a question about the Dufour 335 Grand Large and is the answer not in the manual?
CE Certification | A |
---|---|
Hull Length | 9.99 m |
Beam | 3.49 m |
Keel Type | Fin |
Rudder Type | Spade |
Cabins | 3 |
Berths | 6 |
Details the boat's design category for sailing conditions, including wave height and wind speed.
Information on the boat's conformity to standards and its approval body.
Location and format of the boat's unique hull identification number.
Explanation of the data and specifications found on the boat's builder's plate.
Explanation of symbols used to indicate levels of danger or safety warnings.
Guidelines for safe use, maintenance, and installation of the boat's electrical system.
Procedures and considerations for adding new electrical components to the boat.
Details on battery maintenance, charging, and safe operation of the electric windlass.
Information on the boat's AC power system, including shore connections and safety precautions.
Essential guidelines for the safe operation and maintenance of the gas installation.
Procedures for leak testing the gas system and safely changing gas cylinders.
Details on the bilge pump system, including flow rates and operational guidelines.
Information on the freshwater supply, pump operation, and tank maintenance.
Instructions for operating seacocks, sea toilets, and related sanitary system components.
Guidelines for the proper use and maintenance of the boat's holding tank system.
Recommendations for the installation and types of fire extinguishers on board.
Essential safety procedures and precautions related to fire prevention and fighting.
Important safety and operational advice for the boat's engine.
Warnings and safety measures regarding engine exhaust emissions and propeller hazards.
Steps for properly preparing the engine for winter storage.
Recommendations for safe installation and maintenance of the boat's fuel system.
Details on the steering system, including helm operation and emergency tiller.
Guidelines for safe sailing, speed adjustment, and collision avoidance.
Instructions on how to access and use the emergency tiller for helm damage.
Measures for lightning protection, maintenance after a strike, and safety during storms.
Recommendations for environmental protection and adherence to marine pollution regulations.
Information on mandatory safety equipment and national requirements for CE-marked vessels.
Procedures and precautions for lifting, transporting, and hauling the boat.
Details of the contractual guarantee terms, coverage, and exclusions.
General conditions for making a guarantee claim, including notification and repair procedures.
Procedure for transferring the boat's guarantee to a new owner.
Legal references regarding conformity, discrepancies, and latent defects in consumer sales.
Diagrams illustrating the overall boat layout and the arrangement of deck fittings.
Illustrations of the sail plan, dimensions, and halyard/sheet operating system.
Detailed diagrams of the boat's 12V and 220V electrical systems, including wiring and components.
Diagrams for key systems like steering, gas, water, drainage, holding tank, and lifting.
Diagram illustrating the abandon ship plan and fire extinguisher locations.