INSTALLATION
Log #4
Log #5
Log #6
Figure 18b - Log Installation
5. Install hole in log #4 onto pin on the left side
of log #2, with one end resting on log #3.
6. Install hole in log #5 onto pin on the right
side of log #1, with one end resting on
log #2.
7. Install hole in log #6 onto the pin on the
right side of log #3.
IMPORTANT: Make sure logs do not cover
any burner ports. It is very important to install
the logs exactly as instructed. Do not modify
logs. Use only logs supplied with stove.
To Next Page
Loading...
