Dulytek DHP7 - Handling Precautions

SAFETY PRECAUTIONS (continued)
INSTRUCTION MANUAL: DHP7
PAGE 4
• Remove dust around the plug and power cord with a dry cloth. If the
surruounding is dusty, humid, or oily, short-circuit may occur, causing a
re.
• DO NOT remove the machine cover.
• DONOTdisassemblethepressormakeanymodicationstothe
equipment.
HANDLING PRECAUTIONS
• The press must be operated on a hard, level surface, away from its
edges to prevent accidental tipping over.
• Work area must be kept clean, tidy, and free of obstructions to the press
moving parts.
• Alwaysattachthepowercordtothepressrst,thenplugitintothewall
outlet.
• To unplug the press, turn OFF all controls and switches, only then
remove the plug from the outlet.
• DO NOT touch the press’s hot surfaces. Use heat-resistant gloves or
tools. Care must be exercised as burns can occur from touching platens.
• Keep your hands and other body parts away from the press moving parts
to prevent injury.
• Thispresscomeswithapowercordthattsintoastandardhousehold
3-prongoutlet(110VAmericanmarket).DONOTattempttousethe
equipment with a two-prong electrical cord or any other way without
proper grounding.
• DO NOT exceed the rated capacity.
• Contact DULYTEK if the equipment does not start or if smoke or unusual
odors are detected.
• Always turn the machine OFF and unplug it when done using.
Dulytek Equipment
www.dulytek.com Email: help@dulytek.com
© 2018 Dulytek
All rights reserved