Dulytek DM800 - Page 4

SAFETYPRECAUTIONS(continued)
If product is damaged, appears to be damaged, or malfunctions, contact DULYTEK customer service
at help@dulytek.com.
INSTRUCTION MANUAL: DM800 PAGE 3
• Use this product only as described in this manual.
• Keep the equipment out of the reach of children at all times.
• Unplug the heat press from the electrical outlet and let it cool down
COMPLETELY before cleaning, performing maintenance, or repair.
• DO NOT operate the product after the appliance malfunctions or is dropped
or damaged in any way.
• DO NOT operate the press if the plates are dirty. Clean the plates with
isopropyl alcohol and wipe them dry with a clean cloth. Ensure both plates
are completely dry before use.
• DO NOT immerse the press, its power cord, and plugs in water or any
other liquid.
• DO NOT place the product on or near a hot gas or electric burner, heated
oven, or any other heat source.
• DO NOT operate the product with a damaged cord or plug.
• DO NOT leave any cords near a heat source. It can deform the cord or melt
itsinsulationcausingelectricalshockorre.
• Always insert the power plug all the way in.
• DO NOT handle a power plug or other components of the press with wet
hands.
• When unplugging a power cord, grasp and pull with the plug instead of the
cord.
• DO NOT scratch, cut, twist, excessively bend, or tie the cord or put a heavy
object on it.
• DO NOT let the power cord drape over the countertop or tabletop, where it
can be accidentally tripped over or pulled on.
• DO NOT connect too many power plugs to the same power outlet.
• DO NOT cover the press with a cloth. Doing so may trap heat within and
causere.
• Remove dust around the plug and power cord with a dry cloth. If the
WARNING: Follow the warnings below. Otherwise, death or serious injuries may occur.
Seattle, WA 98105
United States
help@dulytek.com
www.dulytek.com
© Dulytek
All rights reserved