Dulytek DM800 - Handling Precautions

SAFETY PRECAUTIONS (continued)
INSTRUCTION MANUAL: DM800 PAGE 4
surroundingisdusty,humid,oroily,short-circuitmayoccur,causingare.
• DO NOT remove the machine cover.
• DONOTdisassemblethepressormakeanymodicationstothe
equipment.
• ment.
HANDLING PRECAUTIONS
• The press must be operated on a hard, level surface, away from its edges
to prevent accidental tipping over.
• Work area must be kept clean, tidy, and free of obstructions to the press
moving parts.
• Alwaysattachthepowercordtothepressrst,thenplugitintothewall
outlet.
• To unplug the press, turn OFF all controls and switches, only then remove
the plug from the outlet.
• DO NOT touch the press’s hot surfaces. Use heat-resistant gloves or
tools. Care must be exercised as burns can occur from touching platens.
• Keep your hands and other body parts away from the press moving parts
to prevent injury.
• Thispresscomeswithapowercordthattsintoastandardhousehold
3-prong outlet (110VAmericanmarketand220VEuropeanmarket).DO
NOT attempt to use the equipment with a two-prong electrical cord or any
other way without proper grounding.
• Contact DULYTEK if the equipment does not start or if smoke or unusual
odors are detected.
• Always turn the machine OFF and unplug it when done using.
Seattle, WA 98105
United States
help@dulytek.com
www.dulytek.com
© Dulytek
All rights reserved