Caution
To prevent electrical shock, do not operate this unit in wet or moist areas.
There are no user - serviceable parts inside. (See " Maintenance" and "Tube
Chart" sections for user maintenance procedures.)
Performance Specifications
I rack space, 2-channel power amplifier
Power Output –
(Minimum power per channel, both channels driven.)
- 75 watts into 8 ohms Crosstalk - - 68dB
Thd.12%@ 1 Khz Frequency Response - 15Hz-5OKhz
- 100 watts into 4 ohms ( -3dB + OdB )
Thd.15%@ 1 Khz Input Impedance - 30K
Input Sensitivity - .80V
IMD SMPTE (60 Hz/7khz 4:1 ratio)
- 15% into 8 ohm at rated power Protection Circuitry - Front panel
- 2% into 4 ohms at rated power accessible DC rail fuses giving
short circuit and DC fault protection.
Hum and Noise - referred to rated
8 ohms output Output type - Quasi - complimentary
- 60 Hz hum; better Dimensions -Face plate -
than - 105 dB 19" x 1.75"
- 120 Hz ripple; better Chassis/heat sinks -
than - 105dB 17" x 10.5" x 1.75"
- Combined hum noise; better Weight - 13.5 lbs.
than – lOOdB
To Next Page
