10
SAFETY - Machine Specific
(Continued)
Hazard Points on the Uni-Seeder
(Continued)
Pedestal Chain Guards
To prevent hands, etc. getting caught in drive chains, guards
are provided to cover sprockets, chain and chain tensioners
mounted about the drive pedestal and wheel legs (RHS).
These guards must be fitted while using the machine.
Warning: Access to pinch points is still possible from
underneath the guard.
For guard locations on machine, refer Page 11.
Calibrating
Be particularly careful when calibrating the seeding rate. At
this time, the calibration trays have been removed and are no
longer covering the rotating seeder units. See Pinch
Points/Moving Parts (Page 9) for hazardous areas.
Transport
Refer to the operating insturctions for the implement on which
the Uni-Seeder is mounted.
Maintenance
Refer Page 26 for reference to the Maintenance and Care
section of the manual.
Lubrication
Refer Page 27 for reference to the Lubrication Instructions in
this manual.
To Next Page
