1
Instructions for using dunhill DM7
1. Description
This multifunctional watch is equipped with a Swiss-made analogue-
digital movement. It is characterised by having one crown for all its
manipulations. The rotation of this single crown permits:
- in neutral position:
selection of the different functions
- in pulled-out position:
correction of the displayed indications.
The crown also acts as a push piece and serves different functions, such
as: activating or deactivating the alarm; starting, stopping and returning-
to-zero of the chronograph.
Neutral Pulled Out Pushed
Selection Correction Push-piece functions.
2. Selecting the functions
- Turn the crown, in neutral position, forwards or backwards:The
information appears on the dial in the sequence given below –
either from 1 to 8 or from 8 to 1, depending on the sense of
rotation of the crown.
Neutral Local time Seconds Date Day Date
H-Min-Sec
The selected function is identified by the letters which appear in the
upper part of the dial.
Timer Time of another Chronograph Alarm
time zone
NB:
The watch is equipped with a battery end-of-life detector (EOL), acting
by flashing of the numerical display.
To Next Page
Loading...