Dunlop VOLUME (X) MINI - Volume Mode Operation; Volume Mode Setup and Usage; Optional Tuner Integration; Expression Mode Operation

DVP4 VOLUME (X)
™
MINI PEDAL
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658
DESCRIPTION
•ControlsvolumeandFXpedalswithprecision
•PatentedLowFrictionBand-Drivefordurableaction
•Fullyadjustablerockertension
FEATURES
AUXoutputforusewithatunerortocontrol
anFXpedalparameter(toggledbyTUNER/
EXPswitch)
50kΩTRIMPOT(internal)setsFXparameter’s
minimumlevelwhenusingExpressionMode
TIP/RINGswitch(internal)switchtoggles
heel/toepolarityofExpressionMode(set
toTIPbydefault)
TUNER/EXPswitch(internal)togglesAUX
outputfunctionality(settoEXPbydefault)
POWER
TheDVP4doesnotrequireapowersourcetooperate.
DIRECTIONS
WerecommendplacingtheDVP4rstinyoursignal
chain.RunacablefromyourguitartotheDVP4’s
INPUTjack.
ADJUSTABLE TORQUE
Toadjustrockertorque,placepedalintoe-down
position.Inserta1/4"atbladescrewdriverinto
torque-adjustscrewlocatedunderheel-endof
rockerpedal.Turnclockwisetoincreaseresistance
orcounterclockwisetodecreaseresistance.
VOLUME MODE (250 KΩ POT)
•RunacablefromtheDVP4’sOUTPUTjackto
youramplier.
•Withthepedalfullytoe-down,setyourguitarand
amp’smaximumdesiredvolumelevel.
•Movingtherockertowardtheheel-downposition
decreasesoutputlevel,mutingthesignalwhenfully
heel-down.
•Optional:Toconnectatuner,setTUNER/EXPswitchto
theTUNERpositionandrunacablefromtheAUXoutput
toatuner.Signaltotunerisalwaysactive.
EXPRESSION MODE (10 KΩ POT)
•SetTUNER/EXPswitchtotheEXPposition.Run
astereoorTRScablefromtheDVP4’sAUXjack
toyourFXpedal’sexpressionjack.
•Withthepedalfullytoe-down,settheFXparameter
youwanttocontroltothedesiredmaximumlevel.
•Optional:Tosettheparameter’sminimumlevel,use
internalTRIMPOT.Turnitclockwisetoraiseminimum
levelorcounterclockwisetolowerit.Factorysetting
isfullycounterclockwise.
•Movetherockerpedaltowardtheheel-down
positiontolowertheFXparametervaluewithinrange
setbyFXpedalandtheDVP4’sinternalTRIMPOT.
•Optional:UseinternalTIP/RINGswitchtoreversethe
DVP4’sheel/toefunctionality.