Dunster House P5-3050CANPRG

Need help?

Do you have a question about the Dunster House P5-3050CANPRG and is the answer not in the manual?

Summary

Queries Procedure

Contact and Wood Information

Provides manufacturer contact details, the process for queries, and information on the nature of wood.

Important Information

Precautions and Colour Transfer

Outlines essential safety precautions, assembly tips, and advice on wood colour transfer.

Assembly Steps - Main Pergola

Step 1: Securing Beams to Wall

Position and fix beams to the wall using appropriate screws and rawlplugs.

Step 2: Fixing Beams to Support Posts

Fix beams to support posts, ensuring even overhang on both sides.

Step 3: Attaching Roof Rafters

Slot roof rafters through posts and fix to wall support, then attach to posts.

Step 4: Fixing Remaining Rafters

Fix remaining rafters to beam and wall support, ensuring equal spacing.

Step 5: Installing Braces

Install braces onto support posts and beams using hex head screws and washers.

Step 6: Securing Brackets to Posts

Secure brackets to posts and then to the ground using suitable anchors.

Step 7: Adding Post Trims and Logo

Fix post trims to the base of each post and attach the DH logo metal plate.

Additional Wall Panels

Panel Types and Preparation

Details on different wall panel types (CP1, CP2, CP8) and initial preparation notes.

Full Height Wall Panels Assembly

Instructions for assembling full height wall panels, including positioning and trim application.

Half Height Wall Panels Assembly

Instructions for assembling half height wall panels, including positioning and trim application.

Window Panels Assembly

Steps for assembling window panels, positioning glass, and fitting trims.

Glass Installation Details

Specific instructions for installing glass panes, including silicone and beading.