EasyManua.ls Logo

DUO-FAST CNP-65Y User Manual

Default Icon
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OPERATING AIR PRESSURE RANGE: 80-120 PSIG 5.5-8.3 BAR
MAXIMUM OPERATING PRESSURE: 120 PSIG 8.3 BAR
SUJETADOR PARA LA CAPACIDAD DE CARGA:
CI & CS Series de 300 clavos de cabeza redonda en espiral de 1 1/2” de pul-
gadas a 2 1/2” pulgadas de largo; .080 a .105 de Diámetro del Mango.
The CNP-65Y is designed in compliance with American National Standards Institute, ANSI SNT-101-2002 and current applicable
OSHA regulations.
La clavadora con alambre CNP-65Y está diseñada en conjuncto el Instituto Nacional de Normas Americanas ANSI SNT-101-2002
y los reglamentos actuales aplicables de OSHA.
NOTE: LOADING INSTRUCTIONS FOR THIS TOOL ARE LOCATED IN THE SAFETY, OPERATION, AND INSTRUCTION MANUAL.
NOTA: LAS INSTRUCCIONES DE CARGADO PARA ESTA HERRAMIENTA SE ENCUENTRAN EN EL MANUAL DE INSTRUCCIÓN Y OPERACIÓN SEGURA.
WARRANTY: Before buying or using any DUO-FAST tool, read the limited warranty that applies. For warranty details, see the
full-line catalog or the warranty information in the tool carton.
SAFETY: A pair of safety glasses that meets ANSI Z87.1 requirements must always be worn when using this tool. The use of proper
eye protection has been shown to significantly reduce eye injuries. Complete safety training is available from your DUO-FAST
representatives. It includes a wide range of safety materials to help keep safety awareness high throughout the work area.
SEGURIDAD: Un par de gafas de seguridad que cumplen con los requerimientos ANSI Z87.1 deber ser siempre usados con el uso de
esta herramienta. El uso de protección ocular adecuada ha mostrado que reduce significativamente las lesiones oculares. Una capa-
citación completa sobre segurid
ad está disponible a través de sus representantes de DUO-FAST. La misma incluye una amplia gama
de material sobre seguridad para ayudarlo a mantener un alto nivel de conciencia sobre la seguridad en toda el área de trabajo.
RANGO DE AIRE DE PRESIÓN DE FUNCIONAMIENTO
PRESIÓN MÁXIMA DE FUNCIONAMIENTO= 4.57 Kg/cm
2
a 8.44 Kg/cm
2
CONSUMO DE AIRE LIBRE POR DISPARO = 8.44 Kg/cm
2
GARANTÍA: Antes de comprar o utilizar cualquier herramienta DUO-FAST, lea la garantía limitada que se aplica. Para obtener detalles
de la garantía consulte el catálogo de toda la línea o la información sobre la garantía en la caja de la herramienta.
FASTENER LOAD CAPACITY:
CI & CS Series 300 count round head coil nails from 1 1/2” to 2 1/2”
long; .080 -105 shank diameter.
CNP-65Y
ROUND HEAD COIL NAILER
CLAVADORA NEUMATICA ALAMBRE PARA SOLDAR CLAVOS EN ESPIRAL
SMOOTH
RING
SCREW
FREE AIR CONSUMPTION
PER STROKE=
.049 cu. ft. @ 80 psig
.058 cu. ft. @ 90 psig
.066 cu. ft. @ 100 psig
CONSUMO DE AIRE LIBRE
POR DISPARO=
1.41 Ltrs. @ 5.62 Kg/cm
2
1.65 Ltrs. @ 6.33 Kg/cm
2
1.88 Ltrs. @ 7.03 Kg/cm
2
CNP-65Y
Question and Answer IconNeed help?

Do you have a question about the DUO-FAST CNP-65Y and is the answer not in the manual?

DUO-FAST CNP-65Y Specifications

General IconGeneral
TypeCoil Nailer
Power SourcePneumatic
Fastener TypeCoil Nails
Operating Pressure70-120 PSI
Magazine Capacity300 nails
Nail Length1-1/4 inch to 2-1/2 inch

Summary

Product Specifications and Operation

Operating Air Pressure and Consumption

Details operating air pressure range, maximum pressure, and free air consumption per stroke for the nailer.

Fastener Load Capacity

Specifies the types and sizes of round head coil nails the nailer can load and fire.

Safety and Warranty Information

Safety Precautions

Mandates wearing safety glasses meeting ANSI Z87.1 and highlights availability of safety training.

Warranty Information

Advises reading the limited warranty before buying or using the tool and checking catalogs for details.

Dual Action System

Changing Actuation System

Instructions on how to switch between sequential and contact actuation modes by adjusting the control button.

Sequential Actuation

Tool cycles when Safety Yoke is depressed, followed by Trigger Actuation. Repeats if Yoke stays depressed.

Contact Actuation

Tool cycles by depressing Safety Yoke and Trigger simultaneously. No specific sequence is required.

Adjustable Depth of Drive

Adjusting Drive Depth

Guide to adjusting the drive depth using the knob counter-clockwise (less depth) or clockwise (more depth).