Need help?Do you have a question about the Duo-Therm 901 Series and is the answer not in the manual?
Critical safety procedure for gas leak detection and response, including immediate actions.
Essential safety guidelines covering flammable materials, high temperatures, and supervision.
Key safety checks including pilotless ignition, gas detection, valve use, and water damage inspection.
Detailed sequence for safely starting the furnace, from thermostat setting to burner ignition.
Step-by-step instructions for safely shutting off the gas supply to the furnace.
Ensures proper electrical connections, grounding, and checks for high voltage malfunctions.
Diagnoses gas valve malfunctions and addresses erratic operation or flame sensing problems.
Details required gas line pressure and factors affecting supply at low temperatures.
Solutions for excessive noise, erratic fan cycles, and amperage draw issues.
Focuses on input polarity and other common issues within the direct spark ignition system.
Guides adjustment of the heat anticipator for optimal heating cycle duration and comfort.
Covers electrical faults, air switch, gas valve, fan relay, and short circuit diagnostics.
Explains the dual-function blower motor and the ceramic burner head assembly.
Highlights cleaning requirements and provides steps for removing the furnace for service.
Details the step-by-step process of furnace operation from thermostat call to burner ignition.
Explains the safety role of the limit switch and the air flow sensing of the air switch.
Provides instructions for adjusting the air shutter based on altitude and temperature.
To Next Page
General